Indoor P3.0 Gold Wire High Refresh Rate LED Display Module

Short Description:

Main Specification
Pixel Pitch: 3.0 mm
Module Size: 320*160 mm
Resolution: 104*52 dots
LED: SMD2020(gold wire)
Brightness: ≥700 nits
Max Current: ≤4.7 A
Pixel Density: 105625 dots/㎡
Refresh Rate: ≥3840 Hz
Port: HUB75E


Product Detail

Product Tags

Remarks & Key Precautions

1.Indoor S3.0 can go with 640*480mm MG cabinet, suggestion cabinet model is QM-Pro-2.
2.Indoor S3.0 uses HUB75E.
3.S series LED module use gold wire LED lamp and high refresh rate IC.
4.Temperature requirement:

  • Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment. Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.

5.Humidity requirement:

  • Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7.In connection with power supply, it is necessary to ensure tightening of terminal joint screw to prevent joint position from loosening, resulting in wire burning or product damage caused by high contact resistance. Torque of M4 screw is 6.0-8.0 Kgf.cm, and that of M3 screw is 4.0-6.0 Kgf.cm.
8.If there is any dripping on the drip position of the product that needs to be cleaned with alcohol to prevent the product from being damaged due to liquid corrosion;
9. the installation structure used in the screen must be properly grounded to prevent dangerous accidents such as leakage of the screen or electric shock due to grounding errors.

Application

Application

S3.0, Company Showroom, 61sqm


  • Previous:
  • Next: