Indoor P1.5 Gold Wire HD LED Display Module

Short Description:

Main Specification
Pixel Pitch: 1.5mm
Module Size: 320*160mm
Resolution: 208*104dots
LED: SMD1212(gold wire)
Brightness: ≥700nits
Max Current: ≤6.6A
Pixel Density: 422500 dots/㎡
Refresh Rate: ≥3840Hz
Port: HUB320

Product Detail

Product Tags

Remarks & Key Precautions

1.Indoor S1.5 module is fine pixel LED module, so we suggest to go with MG cabinet, cabinet model is QM-Pro-1.
2.Indoor S1.5 uses HUB320, and there is only input port, not output port.
3.S series LED module use gold wire LED lamp and high refresh rate IC.
4.Temperature requirement:

  • 1) Storage temperature range: -10℃-30℃, over 30℃ needs to do cooling treatment. Lamp surface temperature(working period): ≤60℃, temperature control equipment is required to be installed when temperature exceeding the standard.

5.Humidity requirement:

  • Storage humidity range: 10% RH-60% RH, humidity over 60% RH requires dehumidification treatment.

6.Keep away from water: Indoor products have low level of protection, water can make the module short circuit, and leads to circuit device damage, so it is necessary to keep away from the water source.
7. necessary to keep away from the water source. Do not throw, push, squeeze or press the module, avoid damaging the display screen. the range of 10% ~ 65%RH relative humidity, it is recommended to open the display screen once a day, and use it normally for more than 4 hours to remove the humidity on the display screen the process of use and transportation, do not fall, push, squeeze, pressure unit plate, in order to avoid damage to the display screen


S1.5, Company Meeting Room, 5sqm

S1.5, Company Meeting Room, 5sqm

  • Previous:
  • Next: